8-Channel 16-Bit 200ksps ADC Data Acquisition Shield for Arduino
The ARD-LTC1867 is an Arduino compatible shield that contains a Linear Technology LTC1867A 16-Bit, 8-Channel, 200ksps ADC. It can be configured to measure 8 single-ended voltages, 4 differential voltages, or any other combination. A SPI interface allows fast communication to the ADC. The onboard EEPROM can be used to store calibration and configuration information directly on each ARD-LTC1867 board. A 6-byte EUI-48-compatible globally unique ID number is also provided. The ARD-LTC1863 can be used with other Arduino shields to make a simple, yet quite versatile, data acquisition system.
- 16-bit, 200ksps ADC
- 8 single-ended channels, 4 differential channels, or any combination
- Optional onboard 5V linear regulator provides clean power to the ADC
- 128 bytes of onboard EEPROM for storing configuration or calibration values
- Read-only 6-byte EUI-48-compatible globally unique ID
- Arduino form factor and software library
- SPI + I2C Interface
Compatible Arduino Boards
The ARD-LTC1867 uses the programming header for the SPI wires (MISO, MOSI, SCLK), D3 or D8 for /CS to operate the ADC, and the two TWI/I2C pins (SCL and SDA on modern r3 boards, A4/A5 on previous designs) for the EEPROM. Please check carefully for pin conflicts.
Most standard form
factor Arduino or compatible boards should work with the
ARD-LTC1867. This includes the Arduino Uno, Arduino Mega,
and Arduino Ethernet. The Arduino Leonardo uses pin D3 as the TWI/I2C
SCK pin, and thus JP6 must be set to use D8 as the chip select line. Additionally, onboard level shifters for the SPI I/O lines are now included, so Arduino boards using 3.3V
I/O, such as the Due, Zero, etc. can be used directly with the ARD-LTC1867.
Arduino Mini, Micro, and Nano, do not provide the standard Arduino
header connectors and thus cannot be directly used with the ARD-LTC1867.
2.7"(L) x 2.1"(W)Input Voltage Range:
0V to 4.096V (unipolar mode)
-2.048V to +2.048V (bipolar mode)
The complete gEDA design files are available on GitHub.
Note: Arduino is a registered trademark of Arduino AG.
- 6 in stock