The Arduino DCC interface shield (ARD-DCCSHIELD) was one of our oldest products still in production. The original design was from 2015, when we were still fairly new at this and trying to figure out how to make a product. While the design itself was solid, all the fiddly jumpers and such made it a pain […]
Month: August 2022
We’ve gotten the question a number of times about how to turn the SoundBytes modules on and off with a switch. It’s actually really easy, but since the question gets asked, I figured I’d do a very quick write-up on it. First of all, the module requires a clean DC power supply of between 5 […]
I needed a way to drill a 3/8″ to 1/2″ diameter hole in 2″ thick rigid foam. Traditional drill bits wander too much and leave a terribly ragged hole. So do spade bits. A hole saw works great, but the smallest I could find was 3/4″. So… I tried a Grain Belt Models 36″ HO-scale […]